ADJ Startec Series User Instructions

Contents

ADJ Startec Series User Instructions Manual pdf 20 page image

ADJ Products, LLC - www.adj.com - Starbar Wash User Manual Page 19Starbar Wash Operating InstructionsActivate IR Control:This function is used to activate and deactivate the IR remote control sensor. When this function isactivated you can control the fixture using the ADJ UC IR remote or Airstream IR app. Please see page21 for remote controls and functions.1. Plug the fixture in and press the MENU button until “IrXX” is displayed. “XX” represents either“on” or “oFF”.2. Press the UP or DOWN buttons to either activate the remote sensor (On) or deactivate it (Off).Display On/Off:This function is used to control the display status. The display can be set to stay on at all times orturn off after 10 seconds.1. Plug the fixture in and press the MENU button until “dXX” is displayed. “XX” represents either“on” or “oFF”.2. Press the UP or DOWN buttons to toggle between the display being “On” at all times or turn“Off” after 10 seconds.Starbar Wash Master-Slave ConfigurationMaster-Slave Configuration:This function will allows you to link units together to run in a Master-Slave set up. In a Master-Slaveset up one unit will act as the controlling unit and the others will react to the controlling units operatingmode. Any unit can act as a Master or as a Slave however, only one unit can be programmed to actas the “Master.”Master-Slave Connections and Settings:1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR datacables to link your units together. Remember that the Male XLR connector is the input and theFemale XLR connector is the ouput. The first unit in the chain(master) will use the female XLRconnector only. The last unit in the chain will use the male XLR connector only.2. Set the “Master” unit to your desired mode of operation.3. Connect the first “Slave” unit to the “Master.”4. Set the Slave unit(s) to any DMX setting. The “Slave” unit(s) will now follow the “Master”.