ADJ Warlock User Instructions

ADJ Products, LLC - www.adj.com - Warlock Instruction Manual Page 15ADJ Products, LLC - www.adj.com - Warlock Instruction Manual Page 14Lamp Off Via DMX - With this function you can turnthe lamp off using a DMX controller.1. Press the MENU button until “Lamp Off Via DMX” is displayed,press ENTER.2. Either “ON” or “OFF” will now be displayed. Press the UP orDOWN buttons to select “ON” to turn the lamp on, or “OFF” toshut the lamp off.3. Press ENTER to confirm.Lamp On Via DMX - With this function you can turnthe lamp on using a DMX controller.1. Press the MENU button until “Lamp On Via DMX” is displayed,press ENTER.2. Either “ON” or “OFF” will now be displayed. Press the UP orDOWN buttons to select “ON” to turn the lamp on, or “OFF” toshut the lamp off.3. Press ENTER to confirm.Lamp Off if DMX OFF - With this function the lampwill turn off if the DMX signal is missing.1. Press the MENU button until “Lamp Off if DMX OFF” is dis-played, press ENTER.2. Either “ON” or “OFF” will now be displayed. Press the UP orDOWN buttons to select “ON” to turn the lamp on, or “OFF” toshut the lamp off.3. Press ENTER to confirm.Warlock System Menuplayed. Choose an operating mode you would like the unit tostart up in when power is applied or the DMX signal is lost.• Master/Slave - If the DMX signal is lost or power is applied, theunit will automatically go into Master Slave mode.• Blackout - If the DMX signal is lost or power is applied, the unitwill automatically go into stand by mode.• Last State - If the DMX signal is lost the fixture will stay in thelast DMX set up. If power is applied and this mode is set, the unitwill automatically go into the last DMX set up.3. Press ENTER to confirm your desired set up.Lamp On/Off - With this function you can turn the lampon or off via the control panel.1. Press the MENU button until “Lamp On/Off” is displayed,press ENTER.2. Either “ON” or “OFF” will now be displayed. Press the UP orDOWN buttons to select “ON” to turn the lamp on, or “OFF” toshut the lamp off.3. Press ENTER to confirm.Lamp Power On - With this function you can turn thelamp on or off via the control panel.1. Press the MENU button until “Lamp Power On” is displayed,press ENTER.2. Either “ON” or “OFF” will now be displayed. Press the UP orDOWN buttons to select “ON” to turn the lamp on, or “OFF” toshut the lamp off.3. Press ENTER to confirm.Warlock System Menu