ADJ ikon profile ww User Instructions

Also see for ikon profile ww: User manual

Contents

A.D.J. Supply Europe B.V. – www.americandj.eu – Ikon Profile WW Instruction Manual Page 6SYSTEM MENUSystem MenuDMX AddressSlave ModeDMX Last StateDimmer ModeBack LightDisplayManual TestAuto TestFixture TemperatureFixture HoursSoftware VersionSYSTEM MENUOn-Board System Menu. The Ikon Profile WW comes with an easy to navigate system menu. This nextsection will detail the functions of each command in the system menu. Please read the next sectionthoroughly!To access the main menu press the MENU button. Press the UP or DOWN buttons until you reach functionyou wish to change. When you reach the function you wish to change press the enter button. When a functionis selected use the UP or Down buttons to change the function settings. Once your changes are made pressthe enter button, and then press and hold the MENU button for at least three seconds to confirm and lock thechange into the system memory. If the menu button is not pressed and held within eight seconds the fixturewill automatically confirm and lock the change into the system memory. To exit without making any changespress the MENU button.ADDR - DMX Address Setting.1. Press the MENU button until “ADDR” is displayed, press ENTER.2. The current DMX address will now be displayed and flashing. Press the UP or DOWN buttons to find yourdesired address. Press ENTER to set your desired DMX address.NOTE: If after you connect your DMX controller the unit does not fall into DMX mode, press and hold theMENU button for at least 3 seconds.SLND - This will let you set unit as a master or slave in a master/slave configuration.1. Press the MENU button until “SLND” is displayed, press ENTER. “MAST” or “SL 1” will be displayed.2. Press the UP or DOWN buttons until your desired setting is displayed, press ENTER to confim and exit.