ADLINK Technology NuDAM-6050 Manual

Also see for NuDAM-6063: User guide

Contents

ADLINK Technology NuDAM-6050 Manual Manual pdf 66 page image

58 • Command Set3.1.2 Document ConventionsThe following syntax conventions are used to describe the NuDAMcommands in this manual.(LeadingCode)Leading Code is the first characteristic of the NuDAMcommand. All NuDAM commands need a commandleading code, such as %,$,#,@,...etc.1- character(Addr)Module’s address ID, the value is in the range of 00 - FF(Hexadecimal) if no specified in the following2- character(CommandVariable)Items indicate command codes or value of variablesVariable length[Data] Some output command need dataVariable length[Checksum]Checksum in brackets indicate optional parameter,only checksum is enable then this field is required2- character< > Identifies a control code character, such as forcarriage return, its value is 0x0D. 1- character3.1.3 Format of NuDAM Commands(Leading Code)(Addr)(Command)[Data][Checksum]When checksum is enable then [Checksum] is needed, it is2-character.How to calculate checksum value ?[Checksum] = ((LeadingCode)+(Addr)+(Command)+[Data]) MOD 0x100Example 1: checksum is disableUser Command: $012Response: !01400600$ : LeadingCode01 : Address2 : Command (Read Configuration) : Carriage return 0x0D