ADLINK Technology NuIPC cPCI-3700 User Manual

Introduction • 3ÿ DMI BIOS Support: Desktop Management Interface (DMI) allows usersto download system hardware-level information such as CPU type, CPUspeed, internal / external frequencies and memory size.ÿ Multi I/O: Winbond W83977TFÿ Parallel Port: One high-speed parallel port, SPP/EPP/ECP modeÿ Serial Port: Two 16550 UART compatible ports configurable as RS232,COM1 at front panel and COM2 at J2 rear I/O connector.ÿ Enhanced IDE: Bus Mastering EIDE, one internal EIDE interfaces,support Ultra DMA/33 IDE hard disk. A 2.5” inch hard disk is defaultinstalled. To install DOM is possible.ÿ FDD: One floppy drives is default installed (360KB, 720KB, 1.2MB,1.44MB). In two-slots width version of cPCI-3700, no FDD space isavailable.ÿ CRT: C&T 69000 chipset• Embedded 2MB SDRAM display memory• 1280x1024x8bpp colors CRT resolutionÿ USB Interface: Two USB connectors, compliant with USB SpecificationsRev. 1.1ÿ DiskOnChip: The SSD interface supports M-Systems DiskOnChip flashdisk supports system boot and storage capacity from 2MB to 144MB.ÿ Watchdog Timer: 16-level, programmable• I/O port 0443H to enable watchdog.• I/O port 0441H to disable watchdog.• Time-out timing select 0/2/4/6/8/10/12/14/16/18/20/22/ 24/26/28/30seconds (+/-20%).ÿ Green Function: Power management via BIOS, activated throughmouse/keyboard movementÿ Keyboard and Mouse Connectors: PS/2 type mini-DIN that supportsPC/AT; supports a 5-pin external keyboard connectorÿ Environmental and Mechanical:• Temperature: 0°C to 60°C• Humidity: 5% to 95%• PCB Layer: 8 layers• Dimensions: 100mm x 160mm (3.94" x 6.3") for PCB• Full Dimensions: 128mm x 160mm x 60 mm (3-slot)