ADLINK Technology cPCI-6860A Series User Manual

Also see for cPCI-6860A Series: User manual

Contents

ADLINK Technology cPCI-6860A Series User Manual Manual pdf 49 page image

Device Driver Installation • 41SCSI driver InstallationThis section describes the SCSI driver installation for the SCSI controller LSI(SYMBIOS) 53C1000R for the optional RTM. All related drivers are stored inthe ADLINK CD under the directory:x:\cPCI\cPCI-6860A\SCSI\53C1020-U320\Win2000, where x: is the locationof the CD-ROM drive.The 53C1020 driver in the ADLINK CD only supports the Windows 2000environment. The installation procedure for this driver under Windows 2000 isoutlined in this section. For driver installation of other operating systems, referto the README file under its respective directory of the ADLINK CD.NOTE: The most updated SCSI drivers can be downloaded from the LSI Logicweb site at URL: http://www.lsilogic.com.4.3 Driver Installation Under Windows XPThis section describes installation procedures for all software drivers underWindows 2000. Follow the instructions carefully below to avoid any problemsafter installation.VGA Driver InstallationThis section describes how to install the ATI 3D Rage XL VGA driver thatcomes with the ADLINK CD. The ATI Rage XL VGA Driver is included inWindows XP. Follow the steps below to install the display drivers underWindows XP.1. The driver is included in the ADLINK CD. Run thewxp-ragexl-5-10-2600-6009.exe file under the following directory:X:\cPCI\cPCI-6860A\VGA\ATI 3D Rage XL\WinXP.2. Click Next to begin the self-extraction process. The extracted files arestored to the default location:C:\ATI\support\wxp-ragexl-5-10-2600-6009.3. Click Yes to agree to the license and the driver will be installed.4. Finish the installation and reboot the system.