ADT EZ Using Manual

Contents

ADT EZ Using Manual Manual pdf 17 page image

Your ADT Safewatch EZ System is constantly monitoring its own components, as well as all critical services, such as AC power andthe telephone line, to insure that it is always ready to provide the protection for which it was designed. When a system trouble occurs, theEZ Touchpad will caution you with a Trouble TBL light and a beeping sounder.If you cannot immediately fix the trouble, the system can still be used. Simply press SILENCE to view the trouble as described belowand press SILENCE again to exit the VIEW TROUBLE mode. The system can now be armed.To view the trouble, press SILENCE, count the number of Trouble TBL and READY flashes and refer to the following table. If thereis more than one trouble to view, press SILENCE again to scroll to the next trouble, and again to exit the VIEW TROUBLE mode. TheTrouble TBL light will remain pulsing as a reminder if the trouble is still present. NOTE: If EZ Touchpad siren chirps once every 10 sec-onds, call for service.SYSTEM TROUBLE ERROR CODESTBL Flashes /Touchpad beepsREADYFlashes Trouble Condition ActionSTEADY NONE Zones Bypassed This is a reminder that zones have been bypassed (by pressing BYPASS). If it isnecessary to bypass any inoperative zones, it is important to have the zones re-paired as soon as possible.1 NONE AC Power Failure This trouble will occur if AC power is not present. Make sure the system trans-former is plugged into its AC receptacle and check the circuit breaker, otherwisecall for service.2 NONE Low Battery If there has been a recent power failure, the battery may be partially depleted andmust be recharged by the control panel. If the trouble does not clear in 24 hours,call for service.3 NONE CommunicationFailureThe system was not able to report to central station. If this is due to a temporaryinterruption in the telephone service, the trouble can be cleared when the serviceis restored by pressing SILENCE again.4 NONE Telephone Line Cut The telephone line has failed. If telephone service has been temporarily inter-rupted, the trouble will clear when restored. Otherwise, call for service.5 NONE Bell/Siren Trouble There is a problem with the Bell or Siren. Call for service.