ADT FOCUS CADET User Manual

Also see for FOCUS CADET: User guide

Contents

ADT FOCUS CADET User Manual Manual pdf 72 page image

– 72 –System Test (cont’d)Protection GroupsUse this test to determine if the selected Burglary group is ready to turn on.1. Using the operating panel’s numeric keypad, enter a valid ID code todisplay Action Menu 1.2. Press More to display Action Menu 2.3. Press Test to display Test Menu 1.4. Press Burglary groups to display the "Burglary Group Descriptions."5. Press Previous or Next to display the “Group description” to be tested.6. Press Group description to test that specific group and to display thetest results.7. Press Quit to display Action Menu 2.8. To test additional groups, repeat steps 3 through 7.Testing Holdup, Fire, and Supervisory DevicesCaution: Use care when conducting this test. All holdup, fire, andsupervisory functions are disabled during this test mode. In the event of asecurity breach or fire, no signals will be sent to the monitoring center.1. Using the operating panel’s numeric keypad, enter a valid ID code thathas been assigned the privilege level of "Can change perm sched" or "Canbypass FA/HU/SPV."2. Press More to display Action Menu 2.3. Press Test to display Test Menu 1.4. Press Sensor points to display types of devices to be tested.5. Press Holdup, Fire, or Supervisory to display the test instructions.6. Press More twice to scroll through burglar device test instructions. Press“?”. Press More twice to scroll through fire, holdup, and supervisory testinstruction. Press Quit. Press More twice for the remainder of the testinstructions.