ADT Safewatch User Manual

Contents

ADT Safewatch User Manual Manual pdf 25 page image

– 25 –USER FUNCTIONSClock/CalendarYour system can display the current time (see your installer). The date is not displayed, but has aninternal function. The system must be disarmed.To set the time and date: + FUNCTION + [63]Master user code orInstaller CodeThe system will enter the Voice Prompt Calendar Setting mode. The [#] key can be pressed atany time to repeat a voice prompt.NOTES: 1. The keypad beeps twice for invalid data entries (e.g., an hour greater than 12), and the entry will not beaccepted. The keypad beeps once for valid entries.2. Clock-Setting mode automatically ends if no keys are pressed for one minute.3. It is not possible to enter the real time clock programming mode from a wireless keypad4. Pressing any key on a wireless (RF) keypad terminates Clock/Calendar setup.5. It is not possible to enter the real time clock programming mode when either FC or CA is displayed onthe display.1. The system will announce, “Enter two-digit hour then press ADD to accept, ESCAPE to quit”.Hour 12 : A (The current hour will be displayed with the AM/PM indication.)Enter the 2-digit hour (i.e., 01-12).Press [ADD] to accept the entry and continue to the AM/PM selection.Press [ESCAPE] to exit Clock/Calendar mode (keypad beeps 4 times).2. The system will announce, “Enter one for PM, zero for AM, press ADD to accept, ESCAPE to quit”.AM/PM 12: P (The current AM/PM setting will display A or P.)Enter 1 for PM or 0 for AM.Press [ADD] to accept the entry and continue to the minute selection.Press [ESCAPE] to back up to hour selection.3. The system will announce, “Enter two-digit minute press ADD to accept, ESCAPE to quit”.Minute : 25 (The current minute will display.)Enter the 2-digit minute (i.e., 00-59).Press [ADD] to accept the entry and continue to the month selection.Press [ESCAPE] to back up to AM/PM selection.4. The system will announce, “Enter two-digit month press ADD to accept, ESCAPE to quit”.Month 1 (The current month will display.)Enter the 2-digit month designation (i.e., 01-12).Press [ADD] to accept the entry and continue to the day selection.Press [ESCAPE] to back up to Minute selection.