61200176L1-1 Express 6100/6120 User Manual Quick Start-1Quick Startup GuideSETTING UP THE IDSL LINEThe Express 6100/6120 works over leased or “dry” copper providedby the local telephone company. See Specifications on page 4-1 for spec-ifications on maximum distance.1. Connect a VT 100 async terminal, or personal computer with aterminal emulator running 9600 N-8-1, to the MAINTENANCEport.2. Hold down the Control key and press R; then press Enter to dis-play the top menu.3. Using the arrow keys and Enter key to navigate the menu, go tothe Configuration/WAN/ISDN menu.4. Set the rate of transfer that will be used. Both devices must be setat the same rate.5. Use the left arrow key or the Escape key to go back up the menutree. When asked to save ISDN parameters, type y.6. Connect the IDSL line to the RJ-45 jack labeled ISDN on the rearpanel. See Connector Pinouts on page D-1 for connector pinouts.7. When the Loop LED(s) remain solid, the Express 6100/6120 is insynchronization.8. The Link LED will illuminate to indicate that PPP has success-fully negotiated.
