HDSL4 for General Distribution Installation and Maintenance Practice Control Port Operation61223HDSL4L2-5C 39Terminal ModesThe desired terminal mode can be selected from the Terminal Modes Menu, illustrated inFigure 33. Additionally, pressing C TRL +T while on any screen can toggle the two terminalmodes.NOTEThe manual update mode is not a function of the Total Access 3000H4TU-C.Figure 33. Terminal Mode MenuThe module used in this example includes the following terminal emulation modes:• Manual Update Mode - This mode is used to manually update the screens. This modesupports efficient print screen and log file utilities for storage of key provisioningparameters, alarm or performance history and current system status. The message “3SPACES TO UPDATE” appears at the top of each screen. By pressing the spacebar threetimes, the screen refreshes and reflects the most current circuit conditions andprovisioning options.• Real-Time Update Mode (VT100) - This mode provides real-time updating of HDSL4 circuitconditions and provisioning options as changes occur. The default mode is Real-TimeUpdate.Circuit ID:HNTSVLALHDSL4 03/09/05 09:29:45Press ESC to return to previous menuTERMINAL MODES MENUMANUAL UPDATE MODE:* You can print or log screens* No text is highlighted* "3 SPACES TO UPDATE" appears at the top of each screen,reminding you to press the spacebar 3 times to update the screen* There is a delay between screen changes & updates* After 30 min. of no interaction, a new baud rate search is begun* Ignores input until screen is finished printing.REAL-TIME UPDATE MODE:* Faster of the two modes* You cannot print screens to a log file* Highlighting is enabled* Recommended for daily operationPress CTRL+T to toggle update modes on any screen.
