ADTRAN IP 706 Release Notes

Also see for NetVanta 7000 Series: Manual Release notes Configuration and troubleshooting guide Hardware installation guide Hardware installation guide

Contents

ADTRAN IP 706 Release Notes Manual pdf 4 page image

NetVanta 7000 Series Products Release A1.04.00Important Notices 3Important NoticesWeb Configuration Support for ADTRAN IP 706 and IP 712 PhonesAOS A1.01.00 added the ability to configure the IP 706/712 phones from the IPPhone Configs page in the web interface. For more information on the IP 700Series phones, please visit the Product page (http://www.adtran.com/phones)and Support page (http://www.adtran.com/support). The latest firmware version(1.3.3) for the IP 700 Series phones is available on the Support page. Note thatthese pages require an IPT Partner login.Before using the IP Phone Configs GUI or User Accounts GUI to create phoneconfigs for the ADTRAN IP 700 Series phones, the default dial plans need to bechecked to make sure that they in a format compatible for the IP 700 Seriesphones. Go to IP Phone Configs->Default Settings and verify that all entriesending in a "T" have a period before the "T". If any of these entries are missingthe period before the "T", modify that dial string to include the period before the"T".After verifying and, if necessary, modifying the dial strings, a dial string needs tobe added for the intercom functionality. Under Extension Dial Strings, add"**xxxx" or "**xxx", depending on whether you are using four or three digit dialing,respectively.Recommended AOS Image location(s)AOS images can be stored on FLASH/NONVOL as well as on CFLASH.However, it is recommended that the Primary AOS image be stored onFLASH/NONVOL and the backup image be stored on CFLASH. One reason forthis is that with the release of AOS A2.01.00, there will no longer be enoughspace on FLASH/NONVOL to store 2 versions of A2.xx.xx. To copy the currentimage from FLASH/NONVOL to CFLASH, use the command “copy flash cflash ”.Default Configuration ChangesThe following configuration items have had their default value changedPolycom Phone “adtran-sip.cfg” Changes• “stickyAutoLineSeize”: changed to enabled (for more information on thissetting, see the Polycom SIP 2.x Admin Guide .

/ 7

Related manuals for ADTRAN NetVanta 7000 Series