NetVanta 3000 Series Routers Hardware Installation Guide61200860L1-34C © 2003 ADTRAN, Inc. 354. UNIT INSTALLATIONThe instructions and guidelines provided in this section cover hardware installation topics such aswallmounting/rackmounting the unit and installing option cards. These instructions are presented asfollows:• Mounting Options on page 36• Supplying Power to the Unit on page 40• Installing Dial Backup and Network Interface Modules on page 41For information on router configuration for a specific application, refer to the quick start documentsprovided on your ADTRAN OS System Documentation CD. For details on the command line interface,refer to the Command Reference Guide (also included on your CD).Tools RequiredThe customer-provided tools required for the hardware installation of the NetVanta 3000 Series Routersare:• Ethernet cable• Network cable (module-dependent)• DSX-1 cable (T1/FT1 + DSX-1 module only)• DBU cable (dial backup functions require an optional DIM)• Phillips-head screwdriver (rackmounting applications only)To prevent electrical shock, do not install equipment in a wet location or during alightning storm.Electronic modules can be damaged by static electrical discharge. Before handlingmodules, wear an antistatic discharge wrist strap to prevent damage to electricalcomponents. Place modules in antistatic packing material when transporting or storing.When working on modules, always place them on an approved antistatic mat that iselectrically grounded.To access the command line interface (CLI) of the NetVanta 3000 Series Routers, you willalso need a VT100 terminal or PC with terminal emulation software and a console portcable. Instructions on how to access the CLI are given in the Command Reference Guide(provided on the ADTRAN OS System Documentation CD).