Unit Installation NetVanta 3100 Series Hardware Installation Guide26 Copyright © 2015 ADTRAN, Inc. 61700600L2-34C3. UNIT INSTALLATIONThe instructions and guidelines provided in this section cover hardware installation topics, such astabletop, wall, and rack mounting and powering the units. These instructions are presented as follows:• Mounting Options on page 26• Supplying Power to the Unit on page 34For information on router configuration for a specific application, refer to the configuration guides provided onthe ADTRAN Support Community. For details on the command line interface (CLI), refer to the AOSCommand Reference Guide. All other related documents are also available online athttp://supportforums.adtran.com.Tools RequiredThe customer-provided tools required for the hardware installation of the NetVanta 3100 Series are:• Ethernet cable• Phillips-head screwdriverMounting OptionsAll of the NetVanta 3100 Series units can be installed in a wallmount or tabletop configuration. TheNetVanta 3140 (P/N 1700341F1) can be mounted in a rack alone or with two units side by side using theoptional dual mounting tray (P/N 1700508F1).Tabletop MountingFor tabletop mounting, place the unit on a level surface within easy reach of an electrical outlet.To prevent electrical shock, do not install equipment in a wet location or during alightning storm.Ethernet cables are intended for intrabuilding use only. Connecting an ADTRAN unitdirectly to Ethernet cables that run outside the building in which the unit is housedwill void the user's warranty and could create a fire or shock hazard. To connect anADTRAN unit to Ethernet cables that run outside the building, ADTRAN's EthernetPort Protection Device (EPPD) (P/N 1700502G1) must be connected between theunit and the outside plant cable. Use of any Ethernet protector other than ADTRAN'sfor this purpose will void the user's warranty.NetVanta 3140 units have a Kensington lock slot that accepts a lock and cable securitydevice. Consult the manual shipped with your Kensington lock for installation instructions.