NetVanta 7000 Series Release Notes R10.7.1 Errata - Call ControlCopyright © 2013 ADTRAN, Inc. 10Errata - Call ControlThe following is a list of Call Control errata that still exist in AOS version R10.7.1• Adding a description to a status group on the status groups GUI menu can result in a 503 ServiceUnavailable response.• The GUI incorrectly states that System Mode coverage can be set to Busy, when in actuality it would usethe Default Mode coverage.• The System Summary GUI menu is not displayed when the NetVanta 7100 is running NetVanta 6355firmware.• The platform displays as unknown in the GUI when the NetVanta 7100 is running NetVanta 6355firmware.• Auto-link client traffic may negatively impact performance because it is not being discarded under heavycall volume.• When configuring the CODEC Group setting for a SIP trunk in the GUI, if (G.711 uLaw) isselected, the output of a show run in the CLI will show no codec-group is configured.• When using Internet Explorer, the Apply button on the Voice > IP Phone Globals > Default Settings tabwill not function. Workaround: Use Firefox, Chrome, or Safari to apply changes on this GUI page.• Inbound calls from Megapath (Broadsoft) SIP trunks fail to be delivered by FindMe-FollowMe toexternal numbers. Calls roll to next Call Coverage item after being answered at the external number.Workaround: Enable Ringback Only and disable the Accept option in the FindMe-FollowMeconfiguration for the call to external party to be successful.• Caller ID may not be correctly sent when an SLA/SCA call is transferred to an extension.• Successive reINVITE SIP messages to place a call on hold will be rejected with a 400 Bad Requestresponse if incoming music-on-hold is enabled on the SIP trunk.• transport=TCP is incorrectly included in the Contact header on a UDP SIP trunk.• SLA accept/reject templates do not affect calls sent using the SLA.• Call coverage set to internal will still allow calls to be routed out an external trunk.• Single Number Reach can fail to detect fax tones from certain fax machine models.• FindMe-FollowMe fails with Single Number Reach service in NetVanta BCS.• When a voice user is configured for an empty caller ID number, the name is also not transmitted.• Configuring a user to have Dialtone Only message waiting does not result in a SIP NOTIFY message tothe SIP endpoints when a new message is waiting.• When using FindMe-FollowMe on a NetVanta 7100, internal forwards to voicemail will functionproperly. Voicemails that are forwarded to an external server will not function. When Ringback Only isdisabled, only the Refer the Call FindMe-FollowMe action can be used to direct the inbound call to avoice mailbox not located on that NetVanta 7100.• When configuring call coverage, setting the Ring Extension to Never results in a three-second delaydelivering voice traffic to the ADTRAN phone.• Inbound calls are not correctly routed to a SIP identity when configured on an auto attendant.• Intermittent inbound calls on SLA lines ring indefinitely without the switchboard routing the call.Workaround: Enable blind-dial for each analog trunk account.
