ADTRAN NetVanta 7000 Series Configuration And Troubleshooting Manual

Also see for NetVanta 7000 Series: Manual Release notes Release notes Hardware installation guide Hardware installation guide

Contents

ADTRAN NetVanta 7000 Series Configuration And Troubleshooting Manual Manual pdf 11 page image

11FTP: USER command - Password required for 'polycomftp'.FTP: USER command - User 'polycomftp' logged in.FTP: TYPE command - Type is set to I.FTP: CWD command - directory changed to 'ADTRAN'.FTP: PORT command - opening port from 10.10.20.3.FTP: BINARY data connection for ls (10.10.20.3,1031).FTP: NLST command - 'adtran_boot.txt' transfer complete.FTP: PORT command - opening port from 10.10.20.3.FTP: BINARY data connection for adtran_boot.txt (10.10.20.3,1032).FTP: RETR command - BINARY transfer complete.IP.FTP SERVER (RETR) Transfer of file '/ADTRAN/adtran_boot.txt' complete for remote host '10.10.20.3'.Note: The remainder of the file transfers has been removed from this debug example. Confirm that all files listed earlier inthis document are downloaded.Restoring a Phone to the Factory DefaultAt times it may be necessary to clear a phone of its current configuration. With IP 700 Series phones, this is accomplishedby using the menu on a phone while it is idle. The steps below outline this process.From the idle screen of a registered phone:1. Press the Menu key.2. Select Phone Settings.3. Select Reset.4. Press the Edit softkey.5. Press the Factory softkey.Note: The contrast, headset switch hook, personal phonebook, and any other options configured directly on the phone willbe cleared to default during the factory default process.Related DocumentationUser Account Configuration Guide - https://supportforums.adtran.com/docs/DOC-3454IP 700 Series Admin Guide (v1.3.16 and below) - https://supportforums.adtran.com/docs/DOC-2320IP 700 Series Admin Guide (v2.1.0 and above) - https://supportforums.adtran.com/docs/DOC-3483Configuring Status Groups - https://supportforums.adtran.com/docs/DOC-2260Configuring Shared Line Accounts – https://supportforums.adtran.com/docs/DOC-3464Configuring Shared Call Appearances - https://supportforums.adtran.com/docs/DOC-2333Configuring Handset Paging Groups - https://supportforums.adtran.com/docs/DOC-2334Setting the Time Zone Offset for the IP 700 Series Phones - https://supportforums.adtran.com/docs/DOC-2938Updating the Global Phone Directory - https://supportforums.adtran.com/docs/DOC-2940

/ 11

Related manuals for ADTRAN NetVanta 7000 Series