ADTRAN NetVanta 7100 IP PBX Configuration Manual
Also see for NetVanta 7100: Quick reference guideHardware installation guideAdministrator's guideProduct specificationsAdministrator's guide
                                                                                                                                              | |
Contents
| 
Fabric OS 7.4.1a Release Notes v3.0 Page 51 of 142Closed with Code Change in Fabric OS v7.4.1This section lists the defects with Critical, High and Medium Technical Severity closed with a code change.Defect ID: DEFECT000470033Technical Severity: Medium Probability: MediumProduct: Brocade Fabric OS Technology: OtherReported In Release: FOS7.1.1 Technology Area: OtherSymptom: In switchshow output the status field is not properly aligned for the LISL ports display entries (whereit is shifted slightly to the right).Condition: Cosmetic issue in switchshow display when LISL ports are present.Defect ID: DEFECT000471996Technical Severity: High Probability: HighProduct: Brocade Fabric OS Technology: MonitoringReported In Release: FOS7.0.2 Technology Area: Hardware MonitoringSymptom: During POST on reboot, systemverification, or running portloopbacktest command, the portloopbacktest could occasionally fail with errors of "MEM init failed", "Timeout waiting for packet", or it mighttrigger a silent reboot or panic due to "machine check, sig: 7".Condition: This issue will be seen only on 16G switches. It will not be seen on directors.Workaround: To avoid loopback test failures, use small values such as 100 for -nframes option with moreiterations.Defect ID: DEFECT000511742Technical Severity: High Probability: LowProduct: Brocade Fabric OS Technology: SecurityReported In Release: FOS7.3.0 Technology Area: EncryptionSymptom: Under very rare conditions, switch goes to faulty state during firmwaredownload.Condition: Due to Ethernet PHY connection issues, link between Control plane and Datapath plane does notcome up.Recovery: Power cycle the switch to recover from the faulty state.Defect ID: DEFECT000514387Technical Severity: High Probability: LowProduct: Brocade Fabric OS Technology: OtherReported In Release: FOS7.3.0 Technology Area: OtherSymptom: Assert encountered during systemverification test on 16G chassis.Condition: This is a very rare occurrence where assert occurs during systemverification test due to a racecondition. This does not occur under normal circumstances. |
Related manuals for ADTRAN NetVanta 7100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine