Technical Support +1-256-963-8716NetVanta Series(with E1/FE1 or E1/FE1 + G.703 Drop Network Interface Module)Quick Configuration Guide 64200868L1-42C March 2005• Category 5 - UTP cable for connecting the system to the existing network.• VT100 terminal or PC with VT100 emulation software.• DB-9 (male) to DB-9 (female) straight-through cable for configuring the unit.Frame Relay DiagramPPP over Fractional E1 Connection DiagramEquipment RequiredThis quick configuration guide provides step-by-step instructions for configuringyour application. The configuration scripts are available on the ADTRAN OSDocumentation CD.The configuration parameters used in the example outlined in this document are forinstructional purposes only. Please replace all underlined entries (example) with yourspecific parameters to configure your application.Network DiagramsBranch Office Corporate HQNetVantaLAN IP: 10.10.10.1 /24WAN IP: 192.168.72.2 /30eth 0/1LAN IP: 10.10.20.7 /24PWR STAT TDVPNRD TD RD TD RDWAN LANPWR STAT TDVPNRD TD RDNetVanta 3200WAN LANDLCI 16Annex D Signaling192.168.72.1 /30FR 1.xe1 1/2e1 1/1PBXTimeslots 1-15 Data,Timeslots 17-31 Voice** Voice circuits require timeslot 16 for signaling. If voice isrequired on the e1 1/2 G.703 port, the largest data mapwhich can be configured is timeslots 1 - 15 (leaving 17 - 31for voice) or 17 - 31 (leaving 1 - 15 for voice).Network IP: 10.10.20.0Network IP: 190.72.22.0Branch Office Corporate HQNetVantaLAN IP: 10.10.10.1 /24eth 0/1LAN IP: 10.10.20.7 /24WAN IP: 192.168.72.2 /30PWR STAT TDVPNRD TD RD TD RDWAN LANPWR STAT TDVPNRD TD RDNetVanta 3200WAN LANPoint-to-Point E1Timeslots 1-15 Data,Timeslots 17-31 Voice*PPP Signaling192.168.72.1 /30PPP 1e1 1/2e1 1/1PBX* Voice circuits require timeslot 16 for signaling. If voice isrequired on the e1 1/2 G.703 port, the largest data map whichcan be configured is timeslots 1-15 (leaving 17-31 for voice) or17-31 (leaving 1-15 for voice).Network IP: 10.10.20.0Network IP: 190.72.22.0