ADTRAN Total Access 900 Series Quick Configuration Manual

Also see for Total Access 900 Series: Quick configuration guide Hardware installation guide Quick start

ADTRAN Total Access 900 Series Quick Configuration Manual Manual pdf 1 page image

Technical Support 1-888-4ADTRAN (1-888-423-8726)Configuring theTotal Access 900 SeriesWeb-Based GUI, AOS CLI,and Connecting to the UnitQuick Configuration Guide 61210916L1-42.1B March 2006Web-Based GUIThe Web-based GUI is an online configuration tool that allows you to easily configure and viewthe main settings, as well as the status of your system.1. Connect the Total Access 900 Series unit to your network using the ETH 0/1 port on the rearpanel of the unit. The Total Access 900 Series units support auto MDI-MDIX crossover;therefore, a straight-through cable can be used for this connection.2. Configure your PC to obtain an IP address automatically (DCHP), or change the IP addressof your PC to 10.10.10.2. The default address for the Total Access 900 Series unit is10.10.10.1.3. Enter the IP address 10.10.10.1 (default) in your Internet browser Address field (seeexample, below).The configuration parameters used in the example outlined in this document are forinstructional purposes only. Please replace all example entries with your specific parametersto configure your application.Using the Web-Based GUIContact your network administrator if you need assistance changing your computer’sIP settings.If you cannot change the PC’s IP address, you will need to change the Total Access900 Series IP address. For this procedure, see Connecting to the Total Access900 Series on page 4.

/ 4

Related manuals for ADTRAN Total Access 900 Series