ADTRAN NxT1 HSSI/V.35 User Manual

Also see for NxT1 HSSI/V-35: Quick start guide

Chapter 3. Operation30 NxT1 HSSI/V.35 Module User Manual 61200771L1-1installing modules by simply specifying the module that you want to installin each slot.MENU Displays additional status and configuration menus for the selectedmodule. (To access the submenus for this item, use the arrow keys toscroll to the M ENU column for the module you want to edit, and pressEnter.) For detailed information on each submenu item, see the sectionModules/Menu on page 31.ALARM Read security: 5Displays an alarm condition on the NxT1 HSSI/V.35 Module. Press Enter inthis field to activate the menu.TEST Read security: 5Displays test name if the NxT1 HSSI/V.35 Module is executing a test. PressEnter in this field to activate the menu.S TATE Displays module status as either O NLINE of O FFLINE. Even though a moduleis physically installed, it must be marked as online for it to be considered anavailable resource. This field allows an installed module to be marked as of-fline, which may be useful in system troubleshooting. If you choose O FFLINE,the module will not be in alarm condition, but will display OFFLINE.S TATUS This read-only field provides status information on the NxT1 HSSI/V.35Module. The following messages may display:O NLINE The module is enabled, and is responding to the system controller’s statuspolls. This is the normal response of the system.N O R ESPONSE The module is enabled, but is not responding to the system controller’s statuspolls. This response indicates either a problem in the system or that the mod-ule is not installed.TYPE automatically displays the name of an installed module. If you want to change this field toa different type of module, you must set TYPE to EMPTY before selecting the other module.Once a module is installed, STATE must be set to O NLINE in order for the ATLAS 800 Series unitto use the module for any data bandwidth.