Chapter 3. Operation61200060L1-1 TSU User Manual 3-53. When the desired value is in the data field position, pressENTER to set the value.The unit is set for the value shown in the data field and thecursor moves back to the submenu item position indicatingthe operation is complete.4. Select another submenu field or use the CANCEL key toreturn to the submenu.CANCEL is available any time during the operation. If usedprior to pressing ENTER after making a data change, theoriginal data value is restored and the cursor returns to thesubmenu field.ViewingDisplay Only Data FieldsAn example of a Display Only data field is found by selectingthe following menu choices.1. Select STATUS from the main menu.2. Select 2)CURR ERR/ALM from the submenu.LOSS OF SIGNAL INACTIVE/ACTIVE is displayed giving thecurrent state of the alarm.To Exit Any Menu Field Operation or DisplayPress the CANCEL key as many times as required to return tothe desired menu level.
