ADTRAN T1 Installation Instructions Manual

Also see for SHDSL T1: Installation and maintenance practice

Contents

quick start guide

NetVanta Dual T1/FT1 Network Interface Module (NIM) P/N 1200872L1For more detailed documentation, visit us online at www.adtran.com.Quick Start Guide®Quick Start Guide, 61200872L1-13F, November 2006 Copyright © 2006 ADTRAN, All Rights ReservedSPECIFICATIONSOperatingModesFrame Relay, Multilink Frame Relay,PPP, Multilink PPP, HDLCT1/FT1InterfacesSupported Standards: AT&T TR 62411, AT&T TR 54016,Bellcore TR 194, ANSI T1.403Line Rate: 1.544 Mbps ±75 bpsLine Code: AMI or B8ZSFraming: D4 (SF) or ESFFT1 Line Rate: DS0 channelized (multiples of 64 kbps)Input Signal: 0 to -36 dB (DS1)Line Build-Out: 0, -7.5, -15, -22.5 dB (long),0 to 655 ft (short)Connector: RJ-48CDS0 Assignment: ProgrammableClock Source Network, internal, throughDiagnostics Test pattern Generation and Detection: QRSS, 511,2 15 - 1, 220 - 1, all ones, all zerosNetwork loopbacks (local and remote); responds to bothinband and FDL loop codesAlarm generation and detectionNetwork and user sets of performance data (15 minutesand 24 hours)Compliance FCC Part 15 Class A, EN 55022 Class AACTA/FCC Part 68, IC CS-03UL/CUL 60950Physical Dimensions: 2.75-inch W x 4.25-inch DOperating Temperature: 0°C to 50°CStorage Temperature: -20°C to 70°CRelative Humidity: Up to 95 percent, noncondensingNetVanta modules should be installed only inNetVanta Series products.WAN T1/1 DBUWAN T1/2I NSTALLATION I NSTRUCTIONS1. Remove power from the unit.2. Slide the option module into the option slot until the module is firmlyseated against the chassis.3. Secure the pins at both edges of the module.4. Connect the cables to the associated device(s).5. Complete the installation of the base unit.6. Restore power to the unit.For NetVanta modules with outside plantconnections, ensure that all cables are removedfrom the module before installing or removing itfrom the NetVanta chassis.WAN T1/1 AND T1/2 NETWORK (RJ-48C) CONNECTIONPINOUTSPin Name Description1 R1 Receive data from the network - Ring 12 T1 Receive data from the network - Tip 13 — Unused4 R Transmit data toward the network - Ring5 T Transmit data toward the network - Tip6-8 — UnusedAn optional Dial Backup Interface Module (DIM) isrequired for dial backup applications.For a description of the DBU pinouts, refer to the QuickStart Guide included with your DIM shipment.Important: For additional details on product features,specifications, installation, and safety, refer to theappropriate Hardware Installation Guide on theADTRAN OS System Documentation CD shipped withthe base unit and available online at www.adtran.com.

/ 2

Related manuals for ADTRAN SHDSL T1