61202060L4-1 © 2002 ADTRAN, Inc. 43Chapter 5 Configuration MenuCONFIGThe C ONFIGURATION menu is used to set the TSU LT operational configuration, including all of thenetwork interface parameters, and the allocation of the DS0s and the port parameters. See Figure 5-1.Figure 5-1. Configuration MenuNetwork (NI)This menu is used to access the configuration of parameters associated with the network interface in theTSU LT. There are eight submenu items that include setting the format, the line build-out (LBO), and theclock source. See Figure 5-2 on page 44.1) FORMAT2) CODE3) YEL ALRM4) XMIT PRM5) CLOCK SOURCE1) NETWORK (NI) 6) BIT STUFFING7) SET LBO8) RX SENSITIVITY 1) POSITION2) MODEM INIT1) CNTRL PORT 3) DATA RATE2) UNIT2) ALARMS 1) TRAPS2) CONFIG 2) OUTPUT3) TEL NUM1) RATE 56/642) CHANNELS3) DTE TX CLK4) START CHAN3) PORT 5) # OF CHAN6) DATA7) CTS8) DCD9) DSR10) INBAND
