ADTRAN Total Access 916 Hardware Installation Manual

Also see for Total Access 912: Quick reference guide Specifications Hardware installation guide User manual

Contents

ADTRAN Total Access 916 Hardware Installation Manual Manual pdf 28 page image

Unit Installation Total Access 900 Series Hardware Installation Guide28 Copyright © 2005 ADTRAN, Inc. 61210916L1-34AGrounding for AC PowerThe attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type,and the equipment grounding conductors serving these receptacles are to be connected to earth ground atthe service equipment.Supplying Power to the UnitAs shipped, each Total Access 900 Series product is set to factory default conditions. After installing theunit, the Total Access 900 Series product is ready for power-up. To power the unit, ensure that the unit isproperly connected to an appropriate power source (as outlined in the sections below).Total Access 900 SeriesThe Total Access 900 Series comes equipped with a 90 -120 VAC, 60 Hz power supply. The maximumpower consumption is 50 W. A grounded, three-plug detachable cable is included with the shipment.• Use only copper conductors when making power connections.• Install unit in accordance with Article 400 and 364.8 of the NEC NFPA 70.• A readily accessible disconnect device, that is suitably approved and rated, shall beincorporated in the field wiring.• Maximum recommended ambient operating temperature is 50 ° C.