ADURO Bee-Bop User Manual
  | |
Contents | 
TeChniCal speCifiCaTionBluetooth Range: 33 ft (10 m)Playback Time: Appox. 4 hrsDimension: 1.9” x 8.5” x 2.4”(50 x 217 x 63 mm)Weight: 8.9 oz, (252 gr.)Battery : Li-Ion, 800mAhCharging: 5 V, 500 mABee-Bop SpeakerWarranTyAduro warrants this product to be free from defects in materialsand workmanship for one year. If your Aduro product is found tobe defective within that time, Aduro will promptly replace it. Thiswarranty does not cover accidental damage, wear and tear, orconsequential or incidental loss. Under no conditions is Aduroliable for loss of, or damage to devices; nor loss of, or damageto, programs, records, or data; nor any consequential orincidental damages, even if Aduro has been informed oftheir possibility.© Aduro. All rights reserved. Trademarks and registered trademarks are the property of theirrespective owners. In style mobile accessories at www.aduroproducts.complaying MusiCAfter pairing is complete, you can start to play music from yourBluetooth-enabled device. You can use the Bee-Bop Speakercontrols to manage your music.please note: You should set your device to it’s top volume asthe Bee-Bop Speaker can not increase the volume higher thanthe maximum you set on your device.1. Long press “+” volume up; Long press “-” volume down.Volume can also be controlled from your device.2. Short press “+” for next song; short press “-” for previous.3. The Bee-Bop Speaker can only pair to one device at atime; to delete the connection, you must do so throughyour device.hoW To hanDle CallsAfter pairing is established, you can answered/end calls fromyour Bluetooth-enabled smartphone. Long press “ ” to answercall; Long press “ ” to end call. Press and hold “ ” for 2-3seconds to refuse a call. For best call quality, make sure you arefacing the Bee-Bop Speaker and within 3 feet/1 meter.please note: You should set your device on top volume as theBee-Bop Speaker cannot increase the volume higher than themaximum you set on your device.hoW To use line-in-funCTionIf you have a device that is not Bluetooth-enabled and youwould still like to use with the Bee-Bop Speaker, you can! Theenclosed 3.5mm audio cable can connect to your non-Bluetoothenabled devices.1. Turn the Bee-Bop Speaker ON and plug the 3.5mm audiocable into the “AUX” port.2. Plug the other end into your device. Music and volumecan be controlled by your device.TroubleshooTingIf Bluetooth-enabled device fails to locate the Bee-Bop Speaker,check that the speaker is ON. Insure that your device is withinrange (within 30 feet/10 meters).Restart your Bee-Bop Speaker to reactivate Bluetooth pairingmode. Insure that your speaker is not connected or paired toany other Bluetooth device as the Bee-Bop Speaker can onlybe paired to one device at a time. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine