AEC NST3100010 User Manual

Contents

AEC NST3100010 User Manual Manual pdf 2 page image

1.Safety Instructions1.1 Transport★ Please transport the UPS system only in the original packaging (to protect against shock and impact).1.2 Set-up★ Condensation may occur if the UPS system is moved directly from a cold to a warm environment. The UPSsystem must be absolutely dry before being installed. Please allow an acclimatization time of at least twohours.★ Do not install the UPS system near water or in damp environments.★ Do not install the UPS system where it would be exposed to direct sunlight or near heat.★ Do not block off ventilation openings in the UPS system’s housing.1.3 Installation★ Do not connect appliances or items of equipment which would overload the UPS system (e.g. laser printers) tothe UPS outlet socket★ Place cables in such a way that no one can step on or trip over them.★ Do not connect domestic appliances such as hair dryers to UPS output sockets.★ The UPS can be operated by any individuals with no previous experience★ Connect the UPS system only to an earthed shockproof socket outlet.★ The building wiring socket outlet (shockproof socket outlet) must be easily accessible and close to the UPSsystem.★ Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of your computer) to connect theUPS system to the building wiring socket outlet (shockproof socket outlet).★ Please use only VDE-tested, CE-marked power cables to connect the loads to the UPS system.★ This is operator installable.★ When installing the equipment, it should ensure that the sum of the leakage current of theUPS and the connected consumer does not exceed 3.5mA.2Please read the FOLLOWING user manual and the safetyinstructions before installing the unit and starting it up!