AEG 2020 D Operating And Installation Instructions

Also see for 2020 D: Operating and installation instructions

Contents

AEG 2020 D Operating And Installation Instructions Manual pdf 12 page image

12A: Built-in Electric Hob: 650mm minimum clearanceB: Built-in Gas hob: 700mm minimum clearanceC: Slot-in Electric Cooker: 685mm minimum clearanceD: Slot-in Gas Cooker: 787mm minimum clearanceHobClearance HeightsThe cooker hood is designed to be fitted over a cookingappliance at the clearance heights stated, provided themaximum output of the appliance beneath does notexceed the maximums quoted in the TechnicalSpecifications.If the output of the appliance below the cooker hoodexceeds the maximum outputs quoted, please refer tothe cooker manufacturer’s installation instructions.A minimum clearance height of 650mm (25 1/2 ins) isrequired when installed above a built-in electric hob, or700mm (27 1/2 ins) when installed above a built-in gashob.A minimum clearance height of 685mm (27 ins) isrequired when installed above a slot-in electric oven, or787mm (30 1/2 ins) when installed above a slot-in gasoven.When installed between adjoining wall cabinets, the wallcabinets must not overhang the hob and the distancebeetween the underside of the cabinet and the worktopmust be 450mm. If the height of the wall cabinet is lessthan 450mm a gap of 50mm must be maintainedeither side of the hob.This cooker hood must not be installedabove a cooking appliance with a highlevel grill.Selecting the type of installation:The extraction unit at the top of the chimney can beinstalled in one of three ways.1. Air outlet turned upwards recirculation only (fig.2a).2. Air outlet turned towards the wall -extraction only(fig. 3).3. Air outlet turned left or right -extraction only (fig.4a and 4b).INSTALLING THE COOKER HOODG2aS07_30R WW R4b4aS07_033