AEG 20604 G Operating And Installation Manual

Also see for 11602 G: Operating and installation instructions

AEG 20604 G Operating And Installation Manual Manual pdf 9 page image

9Something Not Working?If the hob is not working correctly, please carry out the following checksbefore contacting your local AEG Service Force Centre.SYMPTOMn There is no spark when lightingthe gasn The gas ring burns unevenlySOLUTIONu Check that the unit is plugged inand the electrical supply isswitched onu Check that the RCCB has nottripped (if fitted)u Check the mains fuse has notblownu Check the burner cap and crownhave been replaced correctly, e.g.after cleaning.u Check the main jet is not blockedand the burner crown is clear offood particles.u Check the burner cap and crownhave been replaced correctly, e.g.after cleaning.If after all these checks, your hob still does not operate correctly, contactyour local AEG Service Force Centre.Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.In-guarantee customers should ensure that the above checks have beenmade as the engineer will make a charge if the fault is not a mechanical orelectrical breakdown.