AEG 31000 M Installation And Operating Instructions Manual

Also see for 11000 M: OPERATING AND INSTALLATION Manual

Contents

10Installation InstructionsSafety instructionsThe laws, ordinances, directives and standards in force in the country ofuse are to be followed (safety regulations, proper recycling in accord-ance with the regulations, etc.)Installation may only be carried out by a qualified electrician.The minimum distances to other appliances are to be observed.Drawers may only be installed with a with protective board directlyunder the appliance.The cut surfaces of the work top are to be protected against moistureusing a suitable sealant.The sealant seals the appliance to the work top with no gap.Do not use silicon sealant between the appliance and the work top.Avoid installing the appliance next to doors and under windows. Other-wise hot cookware may be knocked off the rings when doors and win-dows are opened.1 Warning!Risk of injury from electrical current.The combination appliance is live.• Observe electrical safety rules.• Ensure anti-shock protection through correct installation by a quali-fied electrician.• Rated voltage of the combined appliances must match.1 Important!Risk of injury from electrical current.Loose and inappropriate plug and socket connections can lead tooverheating of the plug.• Fit plug and socket connections together properly.A device must be provided in the electrical installation which allows theappliance to be disconnected from the mains at all poles with a contactopening width of at least 3 mm.Suitable isolation devices include line protecting cut-outs, fuses (screwtype fuses are to be removed from the holder), earth leakage trips andcontactors.Move the oven steam outlet pipe with a screwdriver to the centre ofthe opening in the hob. Then put the outlet connection piece over thepipe.