15Caution: In order to avoid a hazard thisappliance must be installed accordingto these instructions for installationThe hob unit can be mounted in anytype of kitchen with a table surfacewhose thickness is between 28 mmand 40 mm.HeadroomThe distance to any shelves or tops ofa cabinet under the hob is to be at least55 mm.FixingScrew the fixing brackets out to suchan extent that they can be turned inunder the table top. Tighten thebrackets on to the table top with anordinary screwdriver.Cut-out measurementsOne rectangular hole is sawn out forthe hob combination chosen.The depth of the cut-out for any unitis: 490 mmLength of hole = sum of all units`externally measured length, less 20mm.Mounting of ReinforcementBeamsA reinforcement Beam, withsupporting flanges at each end, isincluded with each two-burner unit.For unit combinations, a reinforcementbeam must be used between each unit.MIN 55MountingMinimum distanceto side wall:150 mmMinimum distance torear wall (nonflammable material):50 mmReinforcementbeams