AEG 6439 E Instruction Booklet

Contents

19Fig. 9" Carry out the building in of the hobas follows:ï place the seals supplied with thehob on the front edge of the cutout. Then, place them at 11 mmfrom the side edges and at 10 mmfrom the rear edge, as shown inthe diagram, taking care that theseals meet without overlapping(Fig. 8).ï Place the hob in the cut out,taking care that it is centred.ï Fix the hob with the relevant fixingclamps, supplied with theinjectors kit (see Fig. 9). When thescrews have been tightened, theexcess seal can be removed.The edge of the hob forms a doubleseal which prevents the ingress ofliquids. SealinggasketFig. 8