AEG 65852 G Instruction Booklet

Also see for 65852 G: Brochure & specs Instruction booklet

20SealSealSealSealSealFitting the Hob into the WorktopCarry out the building in of the hob asfollows:1. place the seals supplied with thehob on the front edge of the cutout. Then, place them at 11 mmfrom the side edges and at 10mm from the rear edge, asshown in the diagram, takingcare that the seals meet withoutoverlapping.2. Place the hob in the cut out, takingcare that it is centred.3. Fix the hob with the relevant fixingclamps, supplied with theinjectors kit (see diagram). Whenthe screws have been tightened,the excess seal can be removed.The edge of the hob forms a double sealwhich prevents the ingress of liquids.