AEG 66030K-MN Installation And Operating Instructions Manual

Also see for 66030K-MN: Installation and operating instructions

Contents

27… after having switched off the cooking zones, no h for residualwarmth is indicated in the display.Check whether– the cooking zone was only briefly used and therefore did not becomehot enough.If the cooking zone is hot, please call customer service.… a cooking zone will not switch off.Check whether– the sensor switches are partially covered by a damp cloth or liquid.– the blocking function is switched on.…a cooking zone will not switch on.Check whether– the child safety device is swiched on.– the blocking function is switched on.… the e display is illuminated?Check whether the cooking zone has been overheated.This display illuminates in the event of overheating, errors in the elec-tronic equipment or for reasons related to safety.… the appliance is not responding when a sensor panel is actuated.The appliance will not respond to a sensor panel being actuated if youare simultaneously touching another sensor panel that is not part of acombination.If you request a visit from customer service because of an error made inoperating the appliance, a visit from a customer service engineer maynot be free of charge even during the warranty period.