AEG 66300KF-an Installation And Operating Instructions Manual

Also see for 66300KF-an: Operating and installation instructions Installation and operating instructions Installation and operating instructions

49A device must be provided in the electrical installation which allows theappliance to be disconnected from the mains at all poles with a contactopening width of at least 3 mm.Suitable isolation devices include line protecting cut-outs, fuses (screwtype fuses are to be removed from the holder), earth leakage trips andcontactors.Sticking on the seal• Clean the worktop around the cut-out area.• Stick the single-sided adhesive sealing tape provided on the under-side of the hob around the outside edge ensuring that it is notstretched. The two ends of the tape should join in the middle of oneside. After trimming the tape (allow it to overlap by 2-3 mm), pressthe two ends together.