AEG 79852 G Operating Instructions Manual

Also see for 79852 G: Brochure & specs

AEG 79852 G Operating Instructions Manual Manual pdf 17 page image

17Electrical connectionsAny electrical work required to install this hob should be carried out by a qualifiedelectrician or competent person, in accordance with the current regulations.THIS HOB MUST BE EARTHED.The manufacturer declines any liability should these safety measures not be observed.This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.Before switching on, make sure the electricity supply voltage is the same as that indicatedon the hob rating plate. The rating plate is located on the bottom of the hob. A copy isattached on the back cover of this book.The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. Inthe event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must beused.Should the plug need to be replaced for any reason, the wires in the mains lead arecoloured in accordance with the following code:Green and Yellow - EarthBlue - NeutralBrown - Live1) Connect the green and yellow (earth) wireto the terminal in the plug which is markedwith the letter 'E' or the earth symbol orcoloured green and yellow.2) Connect the blue (neutral) wire to the terminalin the plug which is marked with the letter 'N'or coloured black.3) Connect the brown (live) wire to the terminalin the plug which is marked with the letter 'L' or coloured red.Upon completion there must be no cut, or stray strands of wire present and the cordclamp must be secure over the outer sheath.In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse mustbe used.FO 0390A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.Ensure that the cut off plug is disposed of safely.Instructions for the Installer