AEG 79902G Operating Instructions Manual

Also see for 79902G: Operating instructions Operating instructions

AEG 79902G Operating Instructions Manual Manual pdf 10 page image

10In case of accidentalextinguishing (automaticreignition)If the burner flame is accidentally extinguished(draughts, spilling of liquids, etc.), the gas flow isimmediately interrupted.After about 20 seconds, the ignition deviceautomatically repeats the ignition procedure.Upon reignition, the burner flame is first set atmaximum level, then it is automatically adjustedto the level set before it was accidentallyextinguished.If three consecutive reignition attempts fail, asafety device is set on the burner. The flamelevel indicators and the residual heat indicatorflash.Caution! When the safety device is seton a burner, the burner controls cannotbe operated for about 60 seconds.After 60 seconds, you can remove the safetydevice on the burner by touching both theIncreasing Controls and the DecreasingControl at the same time.Then, follow the instructions given in theparagraph “How to light a burner”.)After 60 seconds, you can remove the safetydevice on the burner by touching both theIncreasing Controls and the DecreasingControl at the same time.Then, follow the instructions given in theparagraph “How to light a burner”.Caution! Check that the burner cap andcrown are correctly positioned (seediagram).If the ignition problem persists, refer tochapter “Something not working”.Never use a manual spark gas-lighter ifthe burner ignition device does not workcorrectly. If necessary, use a match.BurnerCapBurnercrownSparkplugThermo-couple