AEG 84602 G Operating Instructions Manual

AEG 84602 G Operating Instructions Manual Manual pdf 16 page image

16A) End of shaft with nutB) WasherC) ElbowFO 0814FO 0264On the end of the shaft, which includes the GJ 1/2" threaded elbow,adjustment is fixed so that the washer is fitted between the components asshown in the diagram. Screw the parts together without using excessiveforce.It is important to install the elbow correctly, with the shoulder on theend of the thread, fitted to the hob connecting pipe.Failure to ensure the correct assembly will cause leakage of gas.Gas ConnectionConnection to the gas supply should be with either rigid or semi-rigid pipe,i.e. steel or copper.The connection should be suitable for connecting to RC 1/2 (1/2 BSP malethread).When the final connection has been made, it is essential that a thorough leaktest is carried out on the hob and installation.Ensure that the main connection pipe does not exert any strain on the hob.Installation