AEG 9600 D Operating And Installation Manual

Contents

AEG 9600 D Operating And Installation Manual Manual pdf 14 page image

14Mounting – Figure 7• Place the outline (1) on the angle above the cooker hood.• As demonstrated, drill the hole and insert four screw anchors andfour screws (2). Do not screw in the screws completely, becausethey act as a hook for the cooker hood.• Prepare the electrical connections and realize a perforation on thewall where the cooker hood is required to be mounted in the externalair discharge version.• Remove the telescopic structure A from the four screws (3), use apencil to mark two perforation for the safety screws, remove thetelescopic structure again A, drill both perforations and insert boththe screw anchors (4).• Adjust the telescopic structure: the three components renderpossible a lengthening between 80 and 100 cm (A). When bothupper components (B) are divided in the same way, the structuremay be lengthened between 100 and 120 cm (between 100 and100.5 cm in the model with the tube).Only for extractor version• Fix the deviation plate F for the air circulation with four screws (2 x 2)on the upper part of the structure A and secure it with a tubing ofsuitable length (5) to the cooker hood’s discharge.Only for the filter version• Ensure that the tube is long enough at the connection ring above thecooker hood (5).After selecting the preferred installation, proceed in thefollowing manner:• Suspend the box (ensuring that the electrical connection box is onthe side where the command components are to be located) andscrew in the four screws (6). Introduce and screw in both the safetyscrews (7).• Carry out the electrical connection (8).• Introduce the chimney cap and fix it to the box with two screws (9),and leave the lower part of the tab momentarily hanging downwards(10).• Suspend the cooker hood covering in the box and affix the providednut screws (11). Screw in the four screws (10).• Connect the motor (13a) and the lights (13b), move the lower side ofthe chimney cap and fix it to the cooker hood using two screws (14).

/ 16

Related manuals for AEG 9600 D