AEG B8871-4 User Manual

Also see for COMPETENCE B8871-4: Operating instructions User information User manual User information

Cleaning and Care46Pyrolytic cleaning1 Warning: The oven gets very hot during this process. Keep small children away.1 Important! All removable parts including the side rails must be removed fromthe oven before using the pyroluxe function.3 If you use the oven shelf runners that are available as special accessories, thesemust be removed before pyrolytic cleaning.If the side rails/oven shelf runners are still in place, ‘C1’ appears in the time display.The pyroluxe process then cannot be started due to a safety cutout that protects the side rails/oven shelf runners.Pyroluxe1. First remove the worst of the residue manually.2. Select oven function Pyroluxe .– P1 appears in the temperature display.– “3:15” appears in the time display,– Cook time flashes for approx. 5 seconds.Pyrolytic cleaning then starts.3 The Light does not work.When the temperature set is reached, the door is locked.The symbol is activated and the bars of the heat indicator light up, until thedoor is unlocked again.Changing the length of the Pyroluxe1. Proceed as described in the section Pyroluxe.2. As long as Cook time is flashing select the desired length of the pyroluxe using or :“2:15” or “3:15”.Cook time flashes for approx. 5 seconds.Pyrolytic cleaning then starts.3 If Cook time is no longer flashing, press the selection button Selectionagain and then perform the setting procedure.3. When the pyroluxe is completed, press any button to end.Changing the Pyroluxe switch off timeThe Pyroluxe switch off time can be changed using the clock function Endtime (within 2 minutes of setting the Pyroluxe).When are the different pyroluxes set:– 2:15 = Pyroluxe Quick: for a light degree of soiling– 3:15 = Pyroluxe Intensive: for a high degree of soiling.All manuals and user guides at all-guides.comall-guides.com