AEG BE1003001 User Manual

Contents

AEG BE1003001 User Manual Manual pdf 5 page image

SAFETY INSTRUCTIONSInstallationWARNING!Only a qualified person must install this appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Obey the installation instruction supplied with the appliance.• Always be careful when you move the appliance because it is heavy. Always wear safetygloves.• Do not pull the appliance by the handle.• Keep the minimum distance from the other appliances and units.• Make sure that the appliance is installed below and adjacent safe structures.• The sides of the appliance must stay adjacent to appliances or to units with the sameheight.Electrical connectionWARNING!Risk of fire and electrical shock.• All electrical connections should be made by a qualified electrician.• The appliance must be earthed.• Make sure that the electrical information on the rating plate agrees with the power sup-ply. If not, contact an electrician.• Always use a correctly installed shockproof socket.• Do not use multi-plug adapters and extension cables.• Make sure not to cause damage to the mains plug and to the mains cable. Contact theService or an electrician to change a damaged mains cable.• Do not let mains cables to come in touch with the appliance door, specially when thedoor is hot.• The shock protection of live and insulated parts must be fastened in such a way that itcannot be removed without tools.• Connect the mains plug to the mains socket only at the end of the installation. Makesure that there is access to the mains plug after the installation.• If the mains socket is loose, do not connect the mains plug.• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses re-moved from the holder), earth leakage trips and contactors.• The electrical installation must have an isolation device which lets you disconnect theappliance from the mains at all poles. The isolation device must have a contact openingwidth of minimum 3 mm.Safety instructions 5