When the cleaning is completed, installthe glass panels and the oven door. Dothe above steps in the oppositesequence.Make sure that you put the glass panels(A and B) back in the correct sequence.The first panel (A) has a decorativeframe. The screen-printing zone mustface the inner side of the door. Makesure that after the installation the surfaceof the glass panel frame (A) on thescreen-printing zones is not rough whenyou touch it.A BMake sure that you install the middlepanel of glass in the seats correctly.9.7 Replacing the lampPut a cloth on the bottom of the interiorof the appliance. It prevents damage tothe lamp glass cover and the cavity.WARNING!Danger of electrocution!Disconnect the fuse beforeyou replace the lamp.The lamp and the lamp glasscover can be hot.CAUTION!Always hold the halogenlamp with a cloth to preventgrease residue from burningon the lamp.1. Deactivate the appliance.2. Remove the fuses from the fuse boxor deactivate the circuit breaker.The back lamp1. Turn the lamp glass covercounterclockwise to remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.10. TROUBLESHOOTINGWARNING!Refer to Safety chapters.ENGLISH 21