AEG BE5304001 User Manual

Also see for BE5304001: User manual User manual

CAUTION!Only use the coretemperature sensor suppliedwith the appliance, orgenuine replacement parts.1. Set the oven function and the oventemperature.2. Put the point of the core temperaturesensor (with the symbol on thehandle) into the centre of the meat.3. Put the plug of the core temperaturesensor into the socket on the front ofthe appliance.Make sure that the core temperaturesensor stays in the meat and in thesocket during the cooking.When you use the core temperaturesensor for the first time, the defaultcore temperature is 60 °C. Whileflashes, you can use the knob for thetemperature to change the defaultcore temperature.The display shows the symbol of the coretemperature sensor and the default coretemperature.4. Press to save the new coretemperature, or wait 10 seconds forthe setting to be saved automatically.The new default core temperature isdisplayed during the next use of the coretemperature sensor.When the meat is at the set coretemperature, the symbol for the coretemperature sensor and the defaultcore temperature flash. An acousticsignal sounds for two minutes.5. Press any button to stop the acousticsignal.6. Remove the plug of the coretemperature sensor from the socket.Remove the meat from theappliance.7. Deactivate the appliance.WARNING!Be careful when you removethe tip and plug of the coretemperature sensor. Thecore temperature sensor ishot. There is a risk of burns.Every time you put the coretemperature sensor in thesocket, you need to set thecore temperature timeagain. You cannot select theduration and end time.When the appliancecalculates the provisionalduration time for the firsttime, the symbol flashesin the display. When thecalculation ends, the displayshows the duration of thecooking. Calculations run inthe background during thecooking and the durationvalue in the display isupdated if necessary.You can change the temperature at anytime during the cooking:1. Press :• one time - the display shows theset core temperature whichchanges every 10 seconds to thecurrent core temperature.• two times - the display shows thecurrent oven temperature whichchanges every 10 seconds to theset oven temperature.• three times - the display showsthe set oven temperature.2. Use the knob for the temperature tochange the temperature.7.2 Inserting the accessoriesWire shelf:Push the shelf between the guide bars ofthe shelf support and make sure that thefeet point down.www.aeg.com12