AEG BP3003001 User Manual

Also see for BP3003001: User manual User manual

AEG BP3003001 User Manual Manual pdf 10 page image

6. CLOCK FUNCTIONSSYM-BOLFUNCTION DESCRIPTIONMINUTE MIND-ERTo set a countdown time. This function has no ef-fect on the operation of the oven. You can set theMINUTE MINDER at any time, also when the ap-pliance is off.TIME OF DAY To set, change or check the time of day. Refer to“Setting the time”.DURATION To set how long the appliance must operate. Firstset an oven function before you set this function.END To set when the appliance must be deactivated.First set an oven function before you set this func-tion. You can use Duration and End at the sametime (Time Delay) to set the time when the appli-ance must be activated and then deactivated.Press again and again tochange the clock function.Press to confirm the settingsof the clock functions, or wait 5seconds for the setting to beconfirmed automatically.6.1 Setting the DURATION orEND1. Press again and again until thedisplay shows or .or flashes in the display.2. Press or to the set minutes.3. Press to confirm.4. Press or to set the hour.5. Press to confirm. An acoustic sig-nal sounds for 2 minutes after thetime ends. or symbol andtime setting flash in the display. Theoven stops.6. Press any button or open the ovendoor to stop the acoustic signal.If you press when you set thehours for DURATION , theappliance goes to setting of theEND function.6.2 Setting the MINUTEMINDERUse this to set a countdown (maximum 2h 30 min). This function has no effect onthe operation of the oven. You can setthe MINUTE MINDER at any time, also ifthe appliance is off.1. Press again and again untiland "00" flash in the display.2. Press or to set the MINUTEMINDER. At first the time is calcula-ted in minutes and seconds. Whenthe time you set is longer than 60minutes, the symbol comes onthe display. The appliance now cal-culates the time in hours and mi-nutes.3. The MINUTE MINDER starts auto-matically after five seconds.After 90% of the set time, anacoustic signal sounds.Press a button to stop the signal.4. When the set time ends, an acousticsignal sounds for two minutes."00:00" and flash in the display.Press a button to stop the signal.If you set the MINUTE MINDERwhen the DURATION or ENDfunction operates, the symbolcomes on the display.10 www.aeg.com