AEG BP320300KM User Manual

6. Close the oven door halfway to thefirst opening position. Then pullforward and remove the door from itsseat.7. Put the door on a soft cloth on astable surface.8. Hold the door trim (B) on the topedge of the door at the two sidesand push inwards to release the clipseal.12B9. Pull the door trim to the front toremove it.10. Hold the door glass panels by theirtop edge and carefully pull them outone by one. Start from the top panel.Make sure the glass slides out of thesupports completely.11. Clean the glass panels with waterand soap. Dry the glass panelscarefully.When the cleaning is completed, installthe glass panels and the oven door. Dothe above steps in the oppositesequence.Make sure that you put the glass panels(A, B and C) back in the correctsequence. The middle panel (B) has adecorative frame. The screen-printingzone must face the inner side of thedoor. Make sure that after the installationthe surface of the glass panel frame (B)on the screen-printing zones is not roughwhen you touch it.A B CMake sure that you install the middlepanel of glass in the seats correctly.ABCwww.aeg.com24