AEG BP7304001 User Manual

Also see for BP7304001: User manual

AEG BP7304001 User Manual Manual pdf 13 page image

SYM-BOLFUNCTION DESCRIPTIONSET+GO To start the appliance with necessary settingswith only one touch of the sensor field, any timelater.7.1 Count Up TimerUse the Count Up Timer to monitor howlong the appliance operates. It is on im-mediately when the appliance starts toheat.Reset the Count Up Timer: touch .Touch until the display shows"00:00" and the Count Up Timer startsto count up again.You cannot use the Count UpTimer when Duration or End isset.7.2 Setting the DURATION1. Activate the appliance and set anoven function and temperature.2. Touch again and again until thedisplay shows . flashes in thedisplay.3. Use or to set the minutes forDURATION.4. Touch to confirm.5. Use or to set the hours forDURATION.If you touch or while youset the DURATION, the appli-ance switches to the setting ofthe END function.6. When the set time ends, an acousticsignal sounds for two minutes.and time setting flash in the dis-play. The appliance deactivates.Touch a sensor field or open theoven door to stop the acoustic sig-nal.7. Deactivate the appliance.7.3 Setting the END1. Activate the appliance and set anoven function and temperature.2. Touch again and again until thedisplay shows . flashes in thedisplay.3. Use or to set the END (firstyou set the minutes and then thehours) and or to confirm.4. When the set time ends, an acousticsignal sounds for two minutes.symbol and the time setting flashin the display. The appliance deacti-vates.5. Touch a sensor field or open theoven door to stop the acoustic sig-nal.6. Deactivate the appliance.7.4 Check result (selectedmodels only)If you set the END or DURATION func-tion, two minutes before the end ofcooking an acoustic signal sounds andthe lamp activates. The appliance goesto the setting of the END or DURATIONfunction. During these two minutes youcan examine the results of the cooking,and, if necessary, add the END or DURA-TION time.7.5 Setting the SET+GO1. Set an oven function (or programme)and temperature (refer to "Settingthe oven function" and "Changingthe temperature").2. Set the DURATION (refer to "Settingthe DURATION").3. Touch again and again untilflashes in the display.4. Touch to set the SET+GO func-tion.The display shows and with anindicator. This indicator shows whichclock function is activated.ENGLISH 13