CLOCK FUNCTIONSSYMBOL FUNCTION DESCRIPTIONCOUNT UP TIMER To set count up. It shows how long the appliance operates.This function has no effect on the operation of the appliance.TIME OF DAY To examine the time of day. For changing the time of day re-fer to 'Setting the time of day'.DURATION To set how long the appliance operates.END To set when the appliance deactivates. You can use Durationand End at the same time (Time delay), if the appliance is tobe activate and deactivate automatically later.SET+GO To start the appliance with necessary settings with only onetouch of the sensor field, any time later.Count Up TimerUse the Count Up Timer to monitor how long the appliance operates. It is on immediatelywhen the appliance starts to heat.Reset the Count Up Timer: touch again and again until flashes in the display. Touchuntil the display shows "00:00" and the Count Up Timer starts to count up again.You can not use Count Up Timer when Duration or End is set.Setting the DURATION1. Activate the appliance and set an oven function and temperature.2. Touch again and again until the dis-play shows .flashes in the display.3. Use or to set minutes for DURA-TION.4. Touch to confirm5. Use or to set hours for DURATION.If you touch or during setting hours for DURATION, the appliance goes to setting ofthe END function.6. When the set time ends, an acoustic signal operates for two minutes.symbol and time setting flash in the display. The appliance deactivates.Touch any sensor field or open the oven door to stop an acoustic signal.7. Deactivate the appliance.Setting the END1. Activate the appliance and set an oven function and temperature.2. Touch again and again until the display shows .16 Clock functions