AEG BS9304001 User Manual

Also see for ProCombi BS9304001: User manual User manual User manual User manual User manual

Contents

AEG BS9304001 User Manual Manual pdf 17 page image

With Duration and End Time you must set the heating function and the temperature first.Then you can set the clock function.When you use the Core Temperature Sensor, Duration and End Time do not work.Heat + HoldYou can activate or deactivate the function in the Basic Settings menu.The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activatesafter the baking or roasting procedure ends.Conditions for the function:• The set temperature is more than 80°C.• The function Duration is set.Activating the function1. Activate the appliance.2. Select the heating function.3. Set the temperature above 80°C.4. Press again and again until the display shows Heat + Hold . Press OK to confirm.When the function ends, an acoustic signal sounds.The Heat + Hold function operates for 30 minutes.The Heat + Hold function stays on if you change the heating functions.Extra TimeThe Extra Time makes the heating function continue after the Duration ends.• Applicable for all heating functions with Duration or Weight Automatic.• Not applicable for heating functions with Core Temperature Sensor.Activating the function:1. When the cooking time ends, an acoustic signal sounds. Press any sensor field.2. The display shows the message for Extra Time for five minutes.3. Press to activate (or to cancel).4. Set the Extra Time period. Press OK to confirm.AUTOMATIC PROGRAMMESWARNING!Refer to "Safety information" chapter.Assisted Cooking with Recipe AutomaticThis appliance has a set of recipes you can use. Recipes are fixed and you cannot changethem.Automatic programmes 17