AEG C61320M Operating And Installation Manual

Contents

Operating Instructions40Digital DisplaysThe current operating state of the relevant cooking zone can be readoff in the digital displays.1. . . 9 = heat setting1 = lowest heat setting9 = highest heat setting% = intermediate stage (= 6.5)3 14 heat settings (including intermediate settings) can be set in the ran-ges 1 - 9.You can select intermediate settings in the ranges 2 - 7.A = Automatic Heating-UpThe cooking zone is set to automatic heating-up.3 A is lit until the automatic feature switches over to the set further coo-king stage.H = Residual Heat Indication1 Danger! The cooking zone is still hot! The display goes out after thecooking zone cools down.3 H is only displayed when the cooking zone is switched off.2 You can use the residual heat for melting and keeping food warm.F = Fault IndicatorF flashes if the cooking zone is switched on and• there is no pot on the cooking zone• there is an unsuitable pot on the cooking zone• the pot base diameter is too small.