AEG C65301K Installation And Operating Instructions Manual

AEG C65301K Installation And Operating Instructions Manual Manual pdf 36 page image

Installation Instructions110Electrical ConnectionBefore connecting, check that the nominal voltage of the appliance,that is the voltage stated on the rating plate, corresponds to the avail-able supply voltage. The rating plate is located on the lower casing ofthe hob.The heating element voltage is AC230 V ~. The appliance also worksperfectly on older networks with AC220 V ~.The hob is to be connected to the mains using a device that allows theappliance to be disconnected from the mains at all poles with a contactopening width of at least 3 mm, eg. automatic line protecting cut-out,earth leakage tripsorfuse.A type H05VV-F cable or one with a higher grade must be used as themains connecting cable.The connection must be carried out as shown in the diagram. The con-necting links should be fitted according to the appropriate connectiondiagram. The earth lead is connected to terminal x. The earth leadmust be longer than leads carrying electric current.The cable connections must be made in accordance with regula-tions and the terminal screws tightened securely.Finally, the connecting cable is to be secured with the mains cable cleatand the covering closed by pressing firmly (lock into place).Before switching on for the first time, any protective foil or stickersmust be removed from the glass ceramic surface.1 Once connected to the mains supply check that all cooking zones areready for use by briefly switching each on in turn at the maximum set-ting.