AEG C65301KF-n Installation And Operating Instructions Manual

Operating Instructions12Operating the hob3 When a cooking zone is switched on, it may hum briefly. This is a char-acteristic of all glass ceramic cooking zones and does not impair eitherthe function or the life of the appliance.TOUCH CONTROL sensor field.To operate the TOUCH CONTROL sensor field place your finger fromabove flat onto the required field until the appropriate displays comeon or go out or the required function is carried out.Switching on the ApplianceThe entire appliance is switched on using the “On/Off” n sensor field.Touch the “On/Off” sensor field for approx. 2 seconds.The digital displays will show j and the decimal point will flash.3 Once the “On/Off” sensor field has been operated to switch on the ap-pliance, one of the cooking zones must be selected within approx.10 seconds using the cooking zone selection buttons. Otherwise the ap-pliance switches off again for safety reasons.